Check out some similar questions!
White rodgers 50a50-241 7 flash error code>>>
[ 21 Answers ]
I have a York Furnace natural gas with a white rodgers 50a50-241 board, After no heat just blowing cold air I shut off the system let it sit for about 5 minutes and turned back on... worked fine for 3 days. Now it give me 7 flashes from the board after 3 tries at lighting on its own. Ignitor burns...
White rodgers 50a50 indicator light unlit
[ 14 Answers ]
My furnace was working fine until an event. The event was that the thermostat got switched from heat to cool on an unusually warm Easter day. Problem was that I had a trap over the air conditioner to keep critters and debri out. I estimate the a/c was on for 10 minutes. When I saw the tarp...
White rodgers 50a50-288 1 flash error code
[ 7 Answers ]
My furnace is intermittently not starting. It is an Amana with a White Rodgers 50A50-288 module in it. The error code I'm getting is "one flash." It says this is "Lockout - check furnace." Yep, furnace is still there... what am I SPECIFICALLY to check? Any suggestions?
White Rodgers 50A50 - 241
[ 1 Answers ]
My heater isn't blowing warm air. It doesn't appear to be igniting. What is the normal voltage output of the igniter wire?
White-Rodgers 50A50 -288 Wiring
[ 1 Answers ]
I have a white-rodgers controller for my furnace/airconditioner, it has a white-rodgers mercury thermostat. Is there a wiring diagram I can follow to re-connect the thermostat? Does it also show where to terminate the coil wires for my condenser? Thank you Todd View more questions Search
Add your answer here.
|