Ask Experts Questions for FREE Help !
Ask
    johnny's Avatar
    johnny Posts: 4, Reputation: 1
    New Member
     
    #1

    Feb 27, 2003, 04:44 PM
    Earthquakes
    :-/ Is there a earthquake fault line in the state of Pennsylvania ?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Feb 27, 2003, 05:24 PM
    Earthquakes
    Hi Johnny, :-/ Yes there are fault lines in Pennsylvania. Read on; ORIGINATOR: Pennsylvania Bureau of Topographic and Geologic Survey, Department of Conservation and Natural Resources
    TITLE: Bedrock Geologic Units, Faults, and Dikes, Sunbury 30- by 60- Minute Quadrangle, East-Central Pennsylvania
    ONLINE LINK: Download
    ABSTRACT: The data set for geologic units, faults, and dikes for the Sunbury 30- by 60-minute quadrangle is part of a digital version of the 1980 "Geologic Map of Pennsylvania" (Berg and others, 1980). The 1980 map, which was published by the Pennsylvania Bureau of Topographic and Geologic Survey (PaGS), shows the areal distribution and extent of bedrock geologic units in Pennsylvania. The 1980 map was compiled and published at the scale of 1:250,000 in a transverse mercator projection. The two digital data sets, one for geologic units and faults, and the other for dikes, were prepared using ARC/INFO software and are provided in a geographic coordinate system (units in decimal degrees). Although it is possible to portray digital data at any scale, the geologic formational contacts, faults, and dikes represented in these data sets are not intended to be used at any scale finer than 1:250,000. The polygon attributes in the data set for geologic contacts and faults include unit number, map symbol, name, age, and three lithology categories that represent the general lithologic makeup of each geologic unit shown on the 1980 map. Each arc (line) in the data set is attributed as one or more of the three general categories of contact, fault, or border. Contact lines are attributed according to the type of contact shown on the 1980 map (solid, dashed, queried, or abitrary). Fault lines are similarly attributed (solid, dashed, or queried). Borders are attributed as either state boundaries or quadrangle boundaries. The data set for dikes consists of arcs attributed with unit number, map symbol, name, age, lithology, and type of dike (solid or dashed). In compiling the data set for the geologic units, the PaGS initially used a data set prepared from the 1980 state geologic map by the U.S. Geological Survey, Water Resources Division (USGS-WRD) in the late 1980

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Earthquakes and tidal forces [ 2 Answers ]

There have recently been two large earthquakes in California and Iran. They occurred at a time when Earth was close to perihelion. It was also close to a New Moon. Could there be a connection? Is there any correlation between earthquakes and astronomical movements?


View more questions Search