Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fan Blower not working in "ON" or "AUTO" in heat or AC
[ 13 Answers ]
Got home from the Brewer game this afternoon and noticed the house was warm(78). Outside was 91. I checked the T-stat and it was set correct. Noticed the air vents weren't blowing anything. Went outside and the condenser and fan was running fine. Then I went downstairs to the furnace unit to see...
Monitor not working "No Signal"
[ 6 Answers ]
I have a Daewoo HL710S LCD Monitor that is Plug & Play and DDC 1, 2B (whatever that means) It works fine with a Dell computer running Windows 2000 Professional. I am now trying to hook it up to a Compaq Evo (D51S) that has Windows XP Professional All I get is a “No Signal” message on the...
The blower doesn't start on "Auto"
[ 10 Answers ]
Please someone help me. My furnace Lennox G20Q3/4E-100-5 behaves as follows: 1) Fan is on "Auto" 2) Thermostat calls for heat 3) Green light comes "On" on IPI module and then burner comes "On" 4) Flame occurs 5) Blower doesn't come "On". After a while, the burner stops due to safety. It...
Thermostat -- What is the "X" wire?
[ 1 Answers ]
On my old Rheem thermostat there's 7 wires: Green - G Red - R Blue - B Yellow - Y Brown - X White - w2 White(looks like its just jumped from e to w2). View more questions Search
|