Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Put new pump down deep well it is getting sand in filter and pump cuts off we put ne
[ 0 Answers ]
Deep well pump problems
New pool pump motor... low pressure low return flow
[ 3 Answers ]
We bought a home with warranty,the pool motor and timer went out... repair company replaced the motor and internal timer mechanism... it is 1 horse 220 volt system... had an eplus motor on it and the pressure was about 10 to 12 pounds on the gauge and the return flow was obvious...
Pump won't lite after cleaning filter and inner filter
[ 1 Answers ]
Filter was complet mush and guk, also in the pump I took out and cleaned the screen , all good now, I primed filter and pump but still would not ignite. Blnk blk blk, after 3 second hold button furnace attempts then must hold for 30 secs to reset from lockout. SO after many attemps, "does it every...
Do I need a filter or a pump?
[ 3 Answers ]
Hey everyone. New here. I have a Hayward DE filter that's tired(10 seasons), and looses pressure after about 15 minutes of use requiring me to go "bump" the pressure. When I do that, its fine for another 15, all the while the pump has stayed on and running seemingly smooth. Do I just need a new... View more questions Search
|