Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How much plywood 4x8 to cover 200 sq ft
[ 11 Answers ]
contract calls for 200 sqft of sheathing(plywood 4x8 sheets) any thing over that amount, you must call the city. is 200 sq ft(1sq ft= 2.1 linear ft) 400 feet in linear ft. but how many plywood sheets would it take to cover 200 sq feet?
Putting plywood over attic insulation.
[ 2 Answers ]
We have an attached garage that is not heated. In the attic I am planning to put some cellulose insulation over the fiberglass stuff. Once this is done I would like to put some plywood down so we can store stuff up there. Should I leave small spaces between the plywood to keep condensation from...
Can thinset be sanded off plywood?
[ 3 Answers ]
I've removed old tile and hardibacker from my plywood subfloor. There is still some thinset stuck to the plywood. Since we are installing hardwood in this location, it needs to be smooth. Can the thinset be sanded? Any particular type of paper recommended? Thanks!
Tiling over plywood
[ 2 Answers ]
The bathroom floor to be tiled is 5/8" subfloor with 1/4" ply ontop screwed every 6 inches.Iam trying to convince carpenter that this does not meet code, nor is it a proper base for tiling. I want him to put down hardibacker (1/4") but he has convinced home-owners not necessary. What do I do?...
Question regarding plywood
[ 3 Answers ]
I will be installing porcelain tiles in a small bath and want to use 3/4" exterior plywood over the subfloor. I will covering that with Ditra matting. I went to Home Depot and the only 23/32" I could find was "Certified sanded". It looked real nice on the sanded side but it was not tonque and... View more questions Search
|