 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heater fails to ignite in auto but ignites when blower "on"
In auto mode the exhaust blower blows but the main blower does not. Occasionally, the heater would start in auto mode but now only works when blower is on - Heater then starts immediately.
Rheem 80 Plus |
||||
Check out some similar questions!
Got home from the Brewer game this afternoon and noticed the house was warm(78). Outside was 91. I checked the T-stat and it was set correct. Noticed the air vents weren't blowing anything. Went outside and the condenser and fan was running fine. Then I went downstairs to the furnace unit to see...
I have an Intertherm Electric Furnace E2EB-015AH. I came home from work last night, turned the heat on and it didn't work as advertised. I could hear the relays clicking occasionally so I investigated a little and found the elements are heating up and cycling, the relay inside the thermostat cycles...
AC problem. My blower fan will not run in auto. (heater runs in auto fine). The fan will run in "on" position. I suspect the timer (or maybe a limit switch if there is one) on the fan control board. Does anyone know where I can get a schematic for the Lennox BCC2 fan control board? Thanks...
OK my central heater blower will not come on at all when on auto, and when on manual/on it just blows cool air out of vents. I was told to put a jumper wire on (w) to (g)wires at the thermostat, (I think) to check it, but not sure exactly. Is that the thermostat on wall or what? The pilot light is...
Our gas heater is 7 years old, and has worked fine in the two years we've rented here. This winter though, we can't get it to work consistently. When on "Auto", it doesn't turn on at all, no matter what temperature we select, and when we turn the fan to "On", it simply blows cold air. It...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
