Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing Analog Thermostat with Non-Programmable Digital Thermostat
[ 1 Answers ]
Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!
Upgrading to a Hunter Thermostat
[ 1 Answers ]
I'm upgrading from a Janitrol HPT 18-60 thermostat to a Hunter 44110 Thermostat. The wiring for the Janitrol is: Y = Yellow wire G = Green wire R = Red wire O = Orange wire W2 = White wire E = Black wire
Upgrading Digital Thermostat w/ Heat Pump & Gas Aux
[ 4 Answers ]
Hi, I am looking for a recommendation for a new thermostat. I currently have an electric heat pump with gas backup and two-stage blower. The current thermostat is a very basic digital model ( White-Rodgers ) and is working properly, as far as I can tell. It works like this: Heating Mode:...
Problems upgrading programmable thermostat
[ 1 Answers ]
I'm upgrading from an "unknown" older analog thermostat to a Honeywell RTH7400 programmable for our heat. The old thermostat had only two wires hooked up, red and green. This must be a single stage unit, since we have a separate thermostat to control A/C (heat pump). The heat is a gas furnace. ...
Upgrading to programmable ac/heating thermostat
[ 5 Answers ]
I am replacing an old thermostat for ac/heating. There are 5 wires red, white, orange, black, green. My new unit (Noma programmable thermostat). The instructions indicate points of connection using red, white, yellow, green. My confusion is, where do I connect orange and black, because there... View more questions Search
|