Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing RTH6300B with wires that are not labeled
[ 2 Answers ]
I am trying to install a programmable thermostat (Honeywell RTH6300B) to replace an existing round Honeywell non-programmable thermostat. The wires on the existing thermostat are not labeled and there are only 2 wires attached (green and yellow). There is a red wire that is taped off. The new...
Installing Honeywell RTH6300B but I have 7 wires.
[ 1 Answers ]
I have a York t-stat for a York system and purchased the 6300. My York t-stat has 7 wires (W, B, G, R, X, O, Y). Of those, the Honeywell instructions indicate that the 6300 will use C, G, W, Y, R, and possibly O or B. It says that if you have both O and B that you should install O and tape up B...
How to connect wires to a RTH6300B honeywell thermostat
[ 2 Answers ]
I only have 2 wires to connect I removed the old wires from the W and R connection And put them on the new one but nothing happens. Any help would be appreciated
Installing Honeywell RTH6300B from an older 7 wire Honeywell. PROBLEMS
[ 4 Answers ]
Hello everyone, I am new here. I found this site which trying to troubleshoot my problem. Any assistance would be GREATLY appreciated. Basically I have an older honeywell programmable thermostat with 7 wires attached. They are as follows... C - Black wire L - Blue wire R- Red wire W2 - brown...
Honeywell RTH6300B, 6 wires and no clue
[ 5 Answers ]
I took out a hunter programmable and replaced it with a honeywell. Heat worked fine but air won't work now. I have 6 wires red, orange, yellow, white, green, black. I have green in G, White in W, and red in R. I have yellow, orange, and black and Y and Rc left. What do I do? Is there a way to use a... View more questions Search
|