Originally Posted by
dellicate
I did that last night and it shut the whole house main waterine. YES I pushed it in all the way. Yes, it stopped the water softener unit, but it seems like its connected to our main water line!
I tried it again, as you said, and water came gushing out so badly that the whole cylinder burst out and I lost the blue knob. I managed to reinsert the cylinder to stop the gush. I had to also shut the whole 2 water main handles down. Now we don't have water. If I turn the water main back on, the softener unit starts hissing again and water keeps flowing out of the black tubes and hoses, filling up the small tank again. This is sick.
Originally Posted by
Milo Dolezal
Btw:... and that Thermal Expansion Tank is installed wrong ...
What thermal expansion tank? Which unit are you talking about?
Originally Posted by
ballengerb1
I think you did not push the red knob far enough in towards the valve. The red button should pretty much bottom out against the valve body.
I tried it again, as you said, and water came gushing out so badly , even brown water that the whole cylinder burst out and I lost the blue knob. I managed to reinsert the cylinder to stop the gush. I had to also shut the whole 2 water main handles down. Now we don't have water. If I turn the water main back on, the softener unit starts hissing again and water keeps flowing out of the black tubes and hoses, filling up the small tank again. This is sick.
