Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    ncinqueg's Avatar
    ncinqueg Posts: 15, Reputation: 1
    New Member
    		  
    #21

    Feb 6, 2013, 05:42 PM
    Gotcha! So you would still just recommend the standard double sanitary tee then?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #22

    Feb 6, 2013, 05:48 PM
    Yes, but I want you to know that the best way to pipe this, BY CODE, is the way I drew it up at post#9. This will work just fine, but may not be approved by all codes, OK?

    Mark
    ncinqueg's Avatar
    ncinqueg Posts: 15, Reputation: 1
    New Member
    		  
    #23

    Feb 7, 2013, 07:36 AM
    Mark - One last follow up question. From your response, it sounds like a double sanitary tee is not code.

    However, if I use a similar one called a "Double Fixture", would that work? Or is that still not code either?
    Attached Images
     
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #24

    Feb 7, 2013, 04:34 PM
    That fitting is better than a double wye fitting, but unfortunately I can't speak to code in your area... can just make generalizations.

    If you want to do this by code that is accepted everywhere, you really need to follow the drawing I posted at post #9.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can New laundry room tie vent and drain with existing shower that shares a wall [ 2 Answers ]

I am considering moving laundry upstairs to small bedroom that shares a wall with existing bathroom. The wall they have in common has a shower and toilet. I plan to have washer positioned on other vside of wall from shower stall. Will that configuration allow me to tie in laundry drain/vent to...

Adding sink drain to laundry room [ 8 Answers ]

I want to add a sink drain from and adjacent room to an existing laundry room. The original drain design does not physically allow space for another connection to the stack below the existing washer drain (see original below). I am thinking of modifying the washer P-trap and using the existing...

Are vent pipes needed on laundry sink and floor drain in basement [ 5 Answers ]

I have a room that is on the back of my house at the same level as my walkout basement. I currently have only a French drain in the center of the room. I would like to put in a laundry sink and a proper floor drain in that room. The room has a concrete floor and the main 4" drain line from the...

Installing a utility sink in the laundry room [ 4 Answers ]

Hi, I want to hook up a utility sink next to my washing machine on the first floor. The washer discharges into a standpipe. The standpipe has a trap, and then connects through a tee to a vertical waste pipe (drain stack?) that goes upstairs through the roof as a vent. Below this tee, there is...

Kitchen Sink/Laundry Sink Drain Vent Non-exist [ 3 Answers ]

The set-up from kitchen sink leading down to drain to basement: 1. Kitchen sink - (R side) - connected to a P drain I think you call it -PVC-, connected to a "metal" T, which has a Studer vent gizmo attached to the top of it, then draining into a metal pipe straight down to the drain in the...

View more questions Search