 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?
I have an older rental house with a furnace that is at least 23 years old (the date stamped on the blower motor is 1983). I don't know the make or model... I can find out, but I don't think it will be relevant for my question. Here is my problem. Someone got into the furnace and messed with the...
I recently change out the fan unit on my furnace but I must have wired it wrong. The problem is in the summer I can run the A/C on auto, but the heat side only runs when the fan is switched on. Did I miss a relay wire or overlooked it all together? Trying to conserve energy. Thanks!
I had a furnace installed in my home (new construction) and am doing the wiring myself. I know that I need a fuseable switch at the furnace but where and how does the transformer get connected for the thermostat? Never wired a furnace before.:confused:
I have an old Carrier/Bryant natural gas central heating and A/C system circa 1980. I recently installed a new thermostat and when I traced down the existing wiring I found something interesting: there is no A/C transformer in the furnace, only the furnace transformer. The two wires from the A/C...
View more questions Search
|
