Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    dflax's Avatar
    dflax Posts: 1, Reputation: 1
    New Member
    		  
    #21

    Apr 7, 2010, 12:04 PM
    My is no the heater thermostat
    garrhodes's Avatar
    garrhodes Posts: 1, Reputation: 1
    New Member
    		  
    #22

    May 30, 2010, 02:10 PM
    I agree with Dvirden - we have the same problem with our State Select Water heater (less than 5 yrs old) - it heats excessively hot - even with being on a mild setting. It lasts maybe 1 1/2 days then has to be reset. We have replaced the thermostat and several other electrical parts to the water heater - very frustrating!
    webhead1's Avatar
    webhead1 Posts: 2, Reputation: 1
    New Member
    		  
    #23

    May 31, 2010, 02:05 PM
    My reset "red" button is in the top panel on the side of the heater is there a common reason why I have to rest :push it in from time to time to get hot water
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #24

    Jun 2, 2010, 05:05 PM
    Hi Webhead...

    Sure is... most often the red reset button "pops" as a result of the water heater overheating... this can be due to a bad thermostat, but can also be due to a bad element. These parts are pretty cheap to purchase... are you comfortable working with electricity? Let me know... OK?

    Mark
    lparedes's Avatar
    lparedes Posts: 1, Reputation: 1
    New Member
    		  
    #25

    Oct 9, 2010, 07:29 AM
    The reset button is within the thermostat, I have this problem now if some one keep helping to resolve this issue will be great
    Luis
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #26

    Oct 9, 2010, 07:48 AM

    Mark gave a great answer just above your post. Time to start to replace the parts starting with the thermostats. Good luck, Tom
    evvil1's Avatar
    evvil1 Posts: 1, Reputation: 1
    New Member
    		  
    #27

    Aug 1, 2011, 06:33 AM
    The reset button is under the TOP ACCESS PANEL.

    http://www.statewaterheaters.com/lit/im/res-Elec/184671-000.pdf

    I don't know why just answering the question was so difficult regardless of other posts.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #28

    Aug 2, 2011, 12:46 PM
    Time time
    Does anybody besides me feel that it's time to close this thread?
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State Select Water Heater [ 24 Answers ]

Power direct vent water heater blower will not shut off. Plenty of hot water. Gas water heater. 75 gallons. State select model pr6 75n rvt. The blower is integral to the unit. I could not find the exact model number on the web site and did not find the problem under the troubbl shooting guide....

State Select Hot Water Heater [ 4 Answers ]

How do I adjust the water temperature on my State Select Water Heater. I don't know where my manuel is and the water is too cool. Thank you.:)

State select water heater [ 1 Answers ]

My state select electric water heater,just stop working and I don't know how to bringing back to work,any ideas.

State select water heater [ 2 Answers ]

How do I adjust the water temp?

View more questions Search