 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We are re-routing the supply line to our pump house, where there is an extension panel with 30A 220V (pump controller) and 15A & 20A 110V breakers. It's about a 60' run from the 200A main service in the house, being placed in conduit 2' underground. The wire in place is newer 10 gauge solid copper....
Im installing a Hunter celing fan and light control model 27182. The switch is equipped with four wires including one black, one blue, one red and one green. On the wall there are a total of 6 wires and a bare wire, 3 black and 3 white. The wires shows as follows: two black wires and two white...
Currently my sub panel in the garage is supplied by 10 gage 2 wire with ground from a 30 amp dbl pull breaker in the house. The run is 30' to the 100 amp box in the garage. The garage is a part time workshop with several power tools on at the same time along with 10 4' fluorescent light fixtures...
What is the wire size needed to run a 240 volt single phase 125 amp around 100 feet?
Hi! I am remodeling and have the walls exposed down to the framing. Before we cover everything up with wall-board I would like to run wire for telephone jacks. What wire do I want to use? I want phone and DSL capability. Is this stuff from Radio Shack adequate for DSL and 1 or two phone...
View more questions Search
|
