Doorbell clicks but doesn't chime when button is pushed

millardmylord Posts: 1, Reputation: 1

New Member

#21

Dec 4, 2013, 09:41 AM

The bell unit itself only has one bar with a spring with a plastic nipple on it. What do I do? Thanks anyone... jason

hkstroud Posts: 11,929, Reputation: 899

Home Improvement & Construction Expert

#22

Dec 4, 2013, 09:46 AM

We don't know. What is your problem?

Add your answer here.

Check out some similar questions!

Lighted doorbell button, light keeps burning out. [ 6 Answers ]

I have a lighted doorbell button. The light keeps blowing out. I have to replace the button a couple times a year. Is this common?

Doorbell won't ring winchester chime unless button is held continuously. [ 4 Answers ]

I replaced the button unit outside when the old one stopped working. But no the Winchester chime won't continue unless the button is continuously pressed. One press = one sound then it stops.?

Wired doorbell, dual chime, front and rear door. [ 6 Answers ]

My door bell works only if my finger is held on the pushbuttons. The front door makes a 6-8 digit chime, the rear door makes a dual chime. If the pushbutton is pushed and released, the chimes are shorter and partial. What's wrong?

Door chime / Bell - ! Button [ 2 Answers ]

Hello, I need to wire up a chime on our first floor and a door bell in our basement while using only 1 push button located at the front door. MY Inlaws live downstaris and if we are not home (main Floor) we all need to hear the chime which is on the main floor and the door bell is in the...

My doorbell won't ring when pushing button [ 11 Answers ]

I recently took off outside button for the doorbell because it was broke. I bought a new one and it didn't work. There are 2 wires outside and I know they are low voltage when I touch them together I see a little spark so the transformer is working? Am a G.C. but I am stumped do I need to change...