Toilet tank cracks open

greidy Posts: 2, Reputation: 1

New Member

#21

May 18, 2015, 06:46 AM

Attachment 47415

massplumber2008 Posts: 12,832, Reputation: 1212

Senior Plumbing Expert

#22

May 18, 2015, 12:46 PM

Thanks for posting... certainly odd, but just continues to prove that unexpected things can happen!

Add your answer here.

Check out some similar questions!

Toilet tank doesn't refill. No water in tank make it flush [ 17 Answers ]

My toilet was working properly before tonight. :p There was no slow leak sound; nothing. Now when the handle is pressed, nothing happens. I opened up the tank and found there was no water in the tank. :( I've been searching the Internet for answers, but haven't found any that address this...

Toilet Flushing: tank drains, toilet doesn't flush, brand new toilet. [ 4 Answers ]

I read the other postings, and most of the problems came in with old toilets. Mine is brand new (within a year old) and I just moved in to my new place. The condo has 2 identical toilets and the other flushes just fine. I have mimicked the settings of the working toilet and still can't get my...

Pressure from toilet valve will not fill toilet tank [ 1 Answers ]

I have recently had a soft water installation put in. The shut off valve is conveniently close to the garage where the clean water tank was installed. Anyhow after the installation was completed pressure worked great in every room except the master bathroom toilet. The dual sink, the shower, and...

Toilet tank lever breaks when I try to flush toilet [ 1 Answers ]

I have a problem trying to flush my toilet. When attempting to flush the plastic tank lever often breaks and when I use the metal tank level they often bend. The only way to flush the toilet is by removing the top and pulling up the tank ball lift by hand. What can I do to solve this problem. Thank...

Which way do I turn the water filter to open it on a bladder tank? [ 1 Answers ]

I need to put a new filter in for our bladder tank. I cannot get it to open. I am wondering if I am turning the housing the wrong way.:confused: I think I am turning it lefty loosey. Can it get stuck? How do I get it off? Thanks