Ask Experts Questions for FREE Help !
Ask
    lowcheryl's Avatar
    lowcheryl Posts: 16, Reputation: 1
    New Member
     
    #21

    Nov 1, 2009, 06:28 PM

    Could it be wrong at stat?
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #22

    Nov 1, 2009, 06:29 PM

    If it has a w2 and an, o and an, e it is a heatpump stat, so it should work.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #23

    Nov 1, 2009, 06:30 PM

    Have you had the same company out every time sense the melt down? And if so how many times have they been there?
    lowcheryl's Avatar
    lowcheryl Posts: 16, Reputation: 1
    New Member
     
    #24

    Nov 1, 2009, 06:31 PM

    OK well the tech is coming back out 2maro afternoon I will go over this stuff with him and hopefully be able to send you an email saying it works... :) thanks for your time and knowledge
    lowcheryl's Avatar
    lowcheryl Posts: 16, Reputation: 1
    New Member
     
    #25

    Nov 1, 2009, 06:32 PM
    Yes and it has been twice the first time they got me some emerg. Heat cause it was 38 degrees that night and then they got all the parts in and came out today and got power going in and out but no stat
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #26

    Nov 1, 2009, 06:36 PM

    OK well let me know what happens. Hope it works out.
    lowcheryl's Avatar
    lowcheryl Posts: 16, Reputation: 1
    New Member
     
    #27

    Nov 1, 2009, 06:38 PM

    You me to before it gets cold again its going to be low 40's and high 30's at night this week... I am not use to the cold here yet

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell T8411R Thermostat Wiring [ 3 Answers ]

Someone gave me this digital thermostat which was used & has no instruction papers. I have a Goodman Heating & A/C self contained unit outside for a mobile home. The old thermostat was a 4 wire system with a green wire on the G terminal, red wire on the RC terminal, blue wire on the Y terminal, and...

Swapping honeywell T8411R to RTH6300B [ 3 Answers ]

On old stat T8411R have wiring on G, C, R, Y, W2 and E are jumpered, and O - on new RTH6300B have G, W O/B, Y, R, Rc. Were does W2 and O from T8411R go on RTH6300B? I know C does not get used on RTH6300B. Does W2 and O both get wired in together on W O/B port?

Wires on honeywell thermostat T8411R [ 2 Answers ]

I was painting my wall and I decided to remove my thermostat off the mounting plate, after I finish I put it back but it didn't work anymore, so I check the wires and noticed a black wire that was loose, all the other wires were in place, so I tried to tight those but a think I accidentally touch...

Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems [ 1 Answers ]

I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...

Honeywell thermostat model #t8411r [ 1 Answers ]

Our system controls both the central air and heat in our home (which is a rental). Yesteday I noticed that after I had switched on the heat that the thermostat was no longer working. We have checked all the breakers and examined the circuit board, however, I am still in a quandry if this is a...


View more questions Search