Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    essuo's Avatar
    essuo Posts: 17, Reputation: 1
    New Member
    		  
    #21

    Oct 29, 2009, 12:40 PM
    Quote Originally Posted by hvac1000 View Post
    The fuseable link is the round item on the wire between the connection to the limit switch and the wire. It may look like a little resistor to you. If that is open it will not allow the voltage to pass to make the circuit.
    Checked the fuesable link and it is good.
    essuo's Avatar
    essuo Posts: 17, Reputation: 1
    New Member
    		  
    #22

    Oct 30, 2009, 07:20 PM

    Good news, furnace is finally working. I had a pro look at it, he figured out what had gone wrong in about 5 minutes. The initial problem was fixed by the transformer that I had replaced. The second problem was caused by my friend - really. We had replaced the old tstat, and one of the wires was put on wrong. The wire was tagged correctly, but it was put on wrong. Lesson learned - double check your work. hvac1000 thanks for your time and all the useful information you provided.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #23

    Oct 30, 2009, 08:08 PM
    Glad you got to the bottom of that one. Stay warm.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace is blowing cold air sometimes. [ 1 Answers ]

Hi! Our gas furnace kicks on and blows hot air, once the house heats up to the set temperature the furnace kicks off. After that, it will not relight until we either turn it off or move the furnistat higher. Could it be the pilot re-light or a thermostat going bad? I think the furnace is 14...

Furnace blowing out cold air [ 9 Answers ]

My furnace has not been used in a year. Just today, I filled up on oil. I have a Beckett oil furnace, model AFG Oil Burner. I am a single female, and I don't know ANYTHING about the furnace. I live in my deceased grandfather's house and I do not know the history of the furnace, only that it was...

Furnace blowing cold air.starts out warm, goes to cold. [ 6 Answers ]

Hoping for help here. I recently had my ignitor replaced. Before that, the furnace wasn't working at all. Now it starts blowing warm (not hot) air, then gradually over a period of a couple of hours, the air cools down until it is completely cold and the temperature in the house drops drastically....

Gas Furnace blowing cold air. [ 1 Answers ]

I have just recently moved into a new house that has a gas furnace ( forced air) in it and we just had to replace the ignitor. Well now its finally working but when its on and blowing warm air after a few minutes it starts to blow out cool air! I just need to know if I need to adjust anything on...

Furnace blowing cold air! [ 2 Answers ]

i have been experiancing problems with my furnace blowing out cold air, the first time i checked the code light it was working normal, the second time it was flashing continuosly fast and it meant call for heat, the third time i checked it said to replace the IFC!! i have no idea what the ifc is,...

View more questions Search