Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    scotta's Avatar
    scotta Posts: 16, Reputation: 1
    New Member
    		  
    #21

    Sep 10, 2009, 12:03 PM
    Mark,

    Thanks for the advise & words on the graphics... that helps. I didn't know that... I assumed you would have just stuck the wrench up the sleeve... know it makes more sense.

    Scott
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #22

    Sep 10, 2009, 12:17 PM
    Keep us posted on your progress!
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Loose faucet handle [ 12 Answers ]

We just installed a new Price Fister faucet in our kitchen sink. The lever that turns the water on doesn't stay up unless you hold it (up is on, down is off). We can't lift the handle halfway to get only a little water because the handle falls to the off position immediately. Is there a screw to...

3 handle shower faucet [ 7 Answers ]

Where can I find a 3 handle nickel finish shower and tub replacements

One handle faucet has low pressure! [ 13 Answers ]

Hi: I have a price Pfister one handle faucet. It has a pull out style sprayer in the middle, not separate faucet and sprayer. I had low pressure on the faucet lately, so I cleaned the screen on the spray head. It increased the pressure for a while but the pressure dropped again. The pressure...

Low hot water pressure from kichen faucet only- 1 handle faucet [ 7 Answers ]

Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...

Kitchen faucet handle [ 1 Answers ]

I am trying to get off my kitchen faucet handle (single faucet) but the hex nut that unlocks it will not turn. Any suggestions how to unloosen the hex nut? I tried vinegar and oil with no success. It is a Kohler single faucet kitchen sink. Thanks, gatnus

View more questions Search