Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #21

    Oct 9, 2012, 05:04 AM
    Then the simple answer is "no"...
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Three phase power to a breaker panel [ 1 Answers ]

Can I connect one phase of a three phase output to one side of a 240 VAC panel and another phase to the other side if I open any and all 240 VAC breakers? This will be a temporary fix until I locate the schmematic to the 15 kW generator. There may be more current flowing through the neutral, but if...

Upgrading Panel From 150 to 200 AMPS. [ 3 Answers ]

I will be upgrading my service panel which is now a 150 Amp up to a 200 Amp panel. I am trying to get a materials list together so I can get prices in order ahead of time. My question is what size copper or aluminum do I need to get to feed from the meter to the panel location? It is about 10...

100 Amp panel vs 325 Amps worth of breakers? [ 1 Answers ]

I have a house built in '49. The basement was remodeled by previous owner and the Service Panel was upgraded to 100 AMP. The wiring to the breakers are a mixture of modern sheathed 3 wire for the basement level and the original knob and tube wiring for main floor circuits (all fed via the attic)....

Max Amps in a Panel and adding a sub panel for more circuits [ 3 Answers ]

Hello all, I recently moved into a condo with a 200 amp panel (in my unit). The main panel is in the electrical room of the building and my unit was previously a commercial retail space. I did some remodeling and my panel is now full. The total combined amps of all the circuit breakers...

3 phase 230 volt panel [ 4 Answers ]

I have a 3 phase 230 volt 3 wire panel that has a 120, 120 & 208 volts phase to ground and 230, 230, & 230 phase to phase.The AC guy came and installed a new 208/230 volt 3 phase unit. He measured above voltages and told me since one of the voltages is 208 we have to fix that problem first. Do you...

View more questions Search