Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    flipspiceland's Avatar
    flipspiceland Posts: 8, Reputation: 1
    New Member
    		  
    #21

    May 28, 2009, 07:13 AM

    @Ceiling fan repair:

    Re: your inquiry

    I have disassembled the enclosure for the motor and had to hacksaw the armature to remove the fan blade.

    If you are still interested I will retrieve the motor from the trash and send it to you.

    Let me know.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #22

    May 28, 2009, 10:40 PM

    I'm not interested in exhaust fans, but thank you.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Install a combination switch [ 4 Answers ]

I am new at this, my question is how do I replace a single wall switch that controls a vanity light and a fan, with a combination single pole double switch with ground. (cooper 3282W) Can any one show me a schematic or give give some info?:confused:

Combination Switch 2 hot 1 neutral [ 1 Answers ]

I had a old combination swicth go bad. The top switch turned on/off outdoor spotlight and the bottom switch turned on/off lights at the end of the driveway. The old switch was wired with a hot and neutral on top and just a hot on the bottom. When I wired the new switch that way the top switch...

Combination switch and receptacle? [ 2 Answers ]

How do I install a combination switch and receptacle. I presently just have a light switch? Thank You.

Wiring manual fan switch [ 5 Answers ]

I'd like to wire my blower motor to my Honeywell CT2800 programmable thermostat so that I can use the manual blower switch. However, I am a bit confused as to how to do this. The furnace is a Clare Brothers MBG120. The 120VAC comes into the furnace and the white wire goes to the 120VAC to 24VAC...

Thermo stat wiring question [ 1 Answers ]

My LUX thermostat and wiring has a red wire and a white wire. My HEIL furnace is labeled R G W Y G. Does the red go to R & white to W? I'm not sure and don't want to cause any damage! Thanks for any help!

View more questions Search