Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
HVAC company installed wrong unit
[ 2 Answers ]
I recently had a new air conditioner installed and the proposal was for a Trane 2-ton R410 unit. They installed a Trane 2-ton R22 unit. I caught this a couple weeks after the unit was fully installed. I have no problems with the R22 unit, as it runs fine. The installer is willing to work with me...
Correct unit installed
[ 6 Answers ]
I have a new home that was built in early 2007. The Heat and cooling system that was used by our builder is a Goodman CPLT36-1B. This is the outside unit. When we moved into our home last June I asked the home inspector if this was a large enough unit. He told me that it was "enough". Here's the...
Installed new thermostat unit doesn't work
[ 4 Answers ]
Hi, Installed a digital thermostat, replacing a manual one. The fan worked for a short time, then switched to heat mode and it didn't work. Found I had it wired one wire wrong, Wired it right, then nothing, Could this cause damage to my unit? I put the old one back on it still doesn't work. I have...
Outside unit doesn't come on when thermostat turns inside unit on so no heat?
[ 1 Answers ]
My thermostat will trip my heater to turn on. The inside blower turns on but the outside unit doesn't turn on. I can get it to go by turnign off the unit at the thermostat and waiting a minute. I turn it on and off until I hear the outside unit turn on. The problem is when the Thermostat turns if...
Installed thermostat, then A/C unit stopped working
[ 2 Answers ]
We just moved into our new home. Noticed the A/C went on all day, non-stop even though it was set on auto at 77 degrees. Figured the thermostat was broken, so decided to replace old one with Honeywell 5-2. Mapped it just like the 4-wiring old one, Y-G-W-R. Red wire on old thermostat was wired to... View more questions Search
|