 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I need to replace a drain line from an old double cast iron kitchen sink. The existing pipe is 1.5" galvanized steel which threads directly into female threads on a 4" cast iron stack. The male threads of the galvanized pipe broke off in the cast iron. I'm guessing the easiest solution is to...
I have a house built in 1962. The cast iron waste pipe runs under the concrete slab in the basement. I have already dug and confirmed the location I want to cut a section out of the pipe and install a "Y" connector and run new plastic waste pipes to a new bath. I have seen PVC connectors that...
Hey there! I've got a 3" cast iron soil stack, with a 1 1/2" Tee fitting which has a plug in it. There's some goop at the joint, it's pretty hard. Not quite JB-weld hard, but hard. It's beige colored. There's not a lot of room in the space, but I've gotten an 18" pipe wrench on it and i...
Hello all, I call this thread the speed bump because when I dug out my basement floor to replace an upstream section of cast iron pipe with new pvc pipe for a bathroom and to move my stack, the downstream attachemtn to the cast iron pipe is now giving me some mild trouble. The cross section of...
I have a stand alone shower on a slab foundation that leaked I pulled the floor out and the cast iron flange for the liner is in bad shape and needs to be replaced. How do I go about this and where do I get the parts.
View more questions Search
|
