Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    sellers's Avatar
    sellers Posts: 6, Reputation: 1
    New Member
    		  
    #21

    Sep 6, 2009, 10:53 PM
    The stand up fan is about three years old and the box fan maybe two now but didn't work out of the box (the packaged box when new). Since fans are half price now, I've replaced them both for under $20 together, but the old stand up fan was much quieter than the new one. Lasko/Lakewood is named on the package of the new box fan.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #22

    Sep 7, 2009, 02:27 PM

    I wouldn't worry about repairing an all plastic box fan they are junk. If it was an old metal one we could have worked it out.
    sellers's Avatar
    sellers Posts: 6, Reputation: 1
    New Member
    		  
    #23

    Sep 10, 2009, 12:39 AM
    I agree. Thanks
    scott53715's Avatar
    scott53715 Posts: 165, Reputation: 10
    Junior Member
    		  
    #24

    Feb 6, 2013, 11:24 AM
    Lakewood engineering is going strong more than 60 years, and is owned by Sunbeam. THE CAPACITOR is for motor start-up. There are thermal fuses in some of these fans.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need Harbor Breeze Ceiling Fan WIre connection help! [ 10 Answers ]

Hello! I just bought a Harbor Breeze 42 in. Chesire ceiling fan. I uninstalled my previous light fixture from my ceiling and there was 3 white wires connected together and 1 red wire coming down from the ceiling. The actual light fixture had a black and brown wire. My ceiling fan has 3 wires...

Fan speed switch [ 4 Answers ]

What is the proper wiring diagram for replacing a 3 speed / 5 wire switch in a ceiling fan? I have four of the wires properly colored coded and hooked up, but, can not find where the last one goes, since I was not the one who removed the original old switch?

Wall Speed control on old ceiling fan install new with pull switch [ 3 Answers ]

I have an old celing fan purchased in the 80's with a wall mount speed control knob. I purchased a Hampton Bay, Huntinton III 522-306 3 speed control with a pull chain. When installing the unit the fan does not work. I have a white wire, a black wire, a blue wire for the light and a ground...

Two speed pedistal fan switch [ 4 Answers ]

Let neighbor borrow fan during hurricane Rita. It is 2 spd.30in pedistal fan. Returned with pull chain switch missing.Old switch positions were1 off, first pull low, second pull off, third pull high,pull again, off.have no idea how switch was wired. Tried ceiling fan switch in various wiring combos...

Your Internet Connection Speed [ 8 Answers ]

Hey everyone, it's been a long time since I visited, it says I haven't been on since dec 6th, I was gone due to work, xmas shopping, and traveling. Anways I was wondering what kind of internet connection everyone uses. Back in my home in California I have cable internet, which is great and super...

View more questions Search