Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #21

    Sep 23, 2008, 01:48 PM
    Hey... just noticed all...

    When rated on a question it no longer shows up at a post? Has anyone else noticed this?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #22

    Sep 23, 2008, 01:49 PM
    Exactly Ron...

    Probably is the only time I get to clean my tools!
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #23

    Sep 23, 2008, 02:05 PM

    Hello every one,

    FYI and if you are not aware of the issues with attachment of the pictures is resolved and you be able to attach pictures and Images, Thanks.

    Best Regards,
    John
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #24

    Sep 23, 2008, 03:43 PM

    We were never notified when a post was rated. I always have to look periodically.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #25

    Sep 23, 2008, 04:11 PM
    Yeah Kiss.. I know that, but usually it showed up at the post/thread itself. I have received a couple greenies in this post and don't see them on this page..?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #26

    Sep 23, 2008, 04:22 PM
    Mark check your profile to see if they are there, bet they are.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #27

    Sep 23, 2008, 04:30 PM
    Thanks Bob... They're there... but they always showed up IN the thread too. Always showed up HERE... as well as in my profile.

    Haven't they always showed up here for you too?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #28

    Sep 23, 2008, 04:34 PM
    Yep but the site is full of mischief at present. Lots of issued popped up so I think the big guys are tweeking the system. Send a PM to Rick or fill out a report to the webmaster. Then of course I did that 2 days ago and my issue is still here. Every post I do I get a message that it is a duplicate of one in the last 5 minutes.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #29

    Sep 23, 2008, 04:42 PM
    Thanks Bob...

    Just what I thought.. at least I can post pics. Again!
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Compression Fitting Leaking: [ 6 Answers ]

Hi, Tried to search, but didn't see an answer: I removed an old compression fitting from a 1/2" copper tube, and cut the tube using a tube cutter. It was a pretty old tube, so it had some crud on the outside. I sanded it down with some 100 grain sand paper and then tried to fit it with a...

Remove PVC Compression Fitting [ 3 Answers ]

How can you remove pvc 1/2" tubing from compression fittings?

Compression fitting on hot water pipe [ 4 Answers ]

Is it OK to use a compression fitting on a hot water pipe? I have to install an air bleeder valve in the middle of a pipe and the area is tight and has electrical wires near the pipe, so I would rather not solder. I know that it is used for appliances, but I am not sure about the high pressure from...

Copper Pipe Compression Fitting [ 7 Answers ]

I'm installing a dishwasher, I've never had one before so I am making all new pipe connections. I'm trying to add a t-fitting and then a valve to a copper water line to be able to turn off the dishwasher water supply while still being able to use the sink. I was told a T-compression would work. ...

Compression Fitting Assistance [ 1 Answers ]

Tom, Exactly how does the hose from the washing machine fit in to the compression fitting? I bought a compression fitting today but when I put the hose from the washing machine in to it, it's not tight. The supply house gave me 3 different rubber washers but none are tight. Am I doing something...

View more questions Search