Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #21

    Apr 26, 2008, 09:01 AM
    TK,

    If you get a moment, would you please look at the pic. Of the SEP and tell me where the power to the panel can be shut down?

    I don't see anything but active CBs.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #22

    Apr 26, 2008, 09:30 AM
    Don, I don't mean to answer to TK, but I replied to this in post #9.
    This is a condo. It is typical to have main lug panels with the main service disconnects at the meters or maybe in an equipment room so they can all be grouped together.

    There is NO main shutoff AT this panel, nor is one required.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How many recessed 65 W lights on one 20amp circuit? [ 5 Answers ]

My question is pretty straight forward. I am going to have 20 recepticals and 16 recessed lights to wire. I have plenty of room for additional breakers in my box I also prefer using 20 amp breakers 12/2 wiring. How do you calculate how many lights and recepticals can go on one circuit? My maximum...

How many light on one circuit? 15-20amp? [ 1 Answers ]

HI;:) I am remodeling my kitchen and installing new lights. I will be installing 8 Halo resesed 6" cans with 60w bulbs but they are rated for 75w, and 2-2tube floresent light fixtures, and they all will be split up between 4 switches but might be all on at the same time. There is one existing...

Circuit breaker OK, but no electricity in living room/dining room [ 5 Answers ]

I have a 100 year old farm home. The lights went out in living room and dining room Thanksgiving night. The circuit breaker appears normal and the panel is OK. What went wrong?

20amp circuit breaker, 15 amp receptacles [ 2 Answers ]

I have a 20amp circuit breaker with 15 amp receptacles and light switches on #12 wire with a load of 1700, is this allowable? If not, and I change to a 15 amp circuit breaker, is the 1440 watt safety load in the code or is it a non-code safety suggestion?

Outside GFI circuit - 15amp outlet on 20amp circuit [ 1 Answers ]

I need a better understanding of what I should do when setting up my new outdoor circuit. I've got a circuit that runs about 150 feet, so I'm installing 10g wire to allow for the voltage drop. I read in the Home Depot Electrical 123 book that I can have at most a 15amp circuit with 10g wire on...

View more questions Search