Not your question?
Ask your question
View similar questions
Check out some similar questions!
Best way to cap a copper water line: compression fitting or copper cap?
[ 29 Answers ]
Hi all, Unsuccessfully tried to cap a copper water line by soldering a pre-soldered cap onto the end. Took all the proper steps, cleaned the ends of the pipe and fitting first, then applied flux around both. Wasn't quite sure what I should be heating, so I just heated everything. After my first...
1863 copper coin
[ 2 Answers ]
I have a copper coin that states on front--"For public Accomodations" dated 1863 with a head of a woman on it and on the back states--"United States Copper" and has a picture of an Eagle on it. Anyone have any ideas as to what this is and if its worth anything? Thanks.:)
Sweating copper to copper valve connections
[ 1 Answers ]
I'm replacing my shower with a Moen system that has a Moentrol three function transfer valve Model 3330. The inlet and outlets are copper to copper. Other than removing the cartridges prior to sweating is their any particular trick to heating those connections on the valve? Thanks very much for...
Copper pipes to cpvc: still ground the old copper?
[ 1 Answers ]
Hi there... again... I have two copper stub outs that come into my garage, one the cold water in, which goes to my waterheater, and one hot water out, to the rest of the house, underground (slab construction). I will be re-plumbing my water heater and adding a bathroom from these lines, but I...
A/C not cooling, Small Copper pipe COLD and Large Copper pipe room temp.
[ 4 Answers ]
I just moved into a newly constructed townhome and the a/c units are of course new. The A/c is not cooling at all. The machine inside turns on as well as the one outside. The inside A/C makes a strange sucking sound kind of like if you were sipping something out of a cup with a straw and you ran... View more questions Search
|