Ask Experts Questions for FREE Help !
Ask
    saivstech's Avatar
    saivstech Posts: 53, Reputation: 2
    Junior Member
    		  
    #1

    Dec 17, 2007, 01:41 PM
    Eject/Load DVDROM device from Command line
    Hello all,

    I'd like to know if there are any specific commands to open/eject and load/close a CD/DVD device from command prompt in XP.

    I don't want to use any utilities/downloads for the above purpose.

    saivstech

Check out some similar questions!

Ice Maker on Whirlpool Refrigerator will not eject Ice [ 3 Answers ]

Any ideas. Thanks

GFCI Line and other Load Outlets [ 3 Answers ]

Hi, all. I have a 20 amp dedicated circuit with a GFCI installed in my downstairs bathroom, with an non-GFCI outlet (load) terminating into my upstairs bathroom. All 12/2. Can I run a fixture off the load line in between the two outlets, like a light and switch?

Ice maker won't eject [ 1 Answers ]

I have a freezer-mounted Whirlpool icemaker(Part #4317943). It was new 4 months ago and, for the past 4 months, has been working normally. Now, what seems to be happening is that it fills normally, but the ice is not being pushed out, Any help would be appreciated. Thank you Foxden

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.