Ask Experts Questions for FREE Help !
Ask
    boptee2's Avatar
    boptee2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2007, 02:44 PM
    Wellsaver water tank
    I have a wellsaver water tank that will not cut off on its own. The pressure will not pump up past 40lbs pressure. The pressure in the pressure tank is 32lbs. How can I fix the problem

Check out some similar questions!

Toilet tank doesn't refill. No water in tank make it flush [ 17 Answers ]

My toilet was working properly before tonight. :p There was no slow leak sound; nothing. Now when the handle is pressed, nothing happens. I opened up the tank and found there was no water in the tank. :( I've been searching the Internet for answers, but haven't found any that address this...

52gallon WellSaver pressure tank [ 7 Answers ]

I have a brand new wellsaver pressure tank. I have set the pressure switch for 30/50. This part of it seems to be working well, but every time I have checked the pressure in the tank I get different readings. Anywhere from 24psi to 40psi and then back to 24 then to 32 and so on. I want to get...

Can one shut off water main valve but leave gas hot water tank on? [ 4 Answers ]

I would like to know if I go away for two days and shut my main water shutoff valve can I leave my gas hot water tank on. I saw two answers To a similar question and one answer said you can leave it on and the other Said you had to shut it off. I am confused now as to whether I can leave the gas...

Pump for wellsaver 52 gl. Tank [ 2 Answers ]

I have a wellsaver 52 gallon tank and trying to find size of pump to go with tank, help please!!

Installing a Wellsaver pressure tank [ 1 Answers ]

I just purchased an 86 gallon Wellsaver tank and I'm not finding installation instructions. The only "instructions" I've found is a diagram on the side of the box. Are there more specific instructions available.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.