Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Grounding a TV antenna
[ 4 Answers ]
Hi, I am installing a small antenna for an HDTV and I want to be sure it is adequately grounded. My understanding is that it needs to be grounded to both a separate rod and to the main service ground; my main issues have to do with logistics and equipment. First, the rod. At the hardware store,...
Do I need to bond a grounding rod I installed for an antenna to my home's ground?
[ 5 Answers ]
I am installing an antenna on my roof. I bought some coax with ground wire attached that I am going to attach to a grounding block at the coax entry point. To the grounding block I am going to attach a #6 bare copper wire to an 8ft copper clad grounding rod. Is this sufficient as is? I read...
Properly grounding a roof antenna
[ 8 Answers ]
I've looked through the threads on this subject and found the answers confusing. What's the proper way to ground my roof TV antenna and mast? According to this HDTV primer site, I need to attach the antenna to BOTH my main panel and a ground rod. This seems redundant. Antenna Primer (1)...
Grounding an antenna with coaxial cable that has a ground wire included
[ 1 Answers ]
We installed an antenna next to our trailer on a mast pole. The coaxial cable we used had a gound wire in it but we didn't use it. We grounded the pole to a grounding rod in the ground and connected copper wire to it. We didn't connect the ground wire inside the cable at all. Is this a mistake?
Differnce between neutral grounding and separated grounding
[ 1 Answers ]
What is the difference between neutral and separate grounding?? Why and when do you defer between them?? Basically why do we ground, what's its purpose and what are the differences between the varying methods. I hope I don't sound dumb but the US NAVY nuclear electrical school didn't teach me ... View more questions Search
|