Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Dead bolt installation in a metal door specifics, Can it be done to all metal doors?
[ 2 Answers ]
Can all you install a deadbolt in all metal doors. Or are there some with foam core construction that you should not attempt installing a deadbolt. If it is possible on a metal with foam core residential door (1987 construction) Do the screws that hold the deadbolt to the edge of the door...
GASOLINE smell in closet with electric hot water heater
[ 3 Answers ]
We live in an apartment above the maintenance garage in our apartment complex and have had issues for the past few months with a gasoline smell coming from our walk-in closet (where the electric hot water heater is) and under both our kitchen and bathroom sinks. Maintenance for the complex has...
Furnace Closet Doors
[ 6 Answers ]
My furnace is located in a closet next to the hot water heater. The area is closed off by 2 bi-fold slotted closet doors. This area happens to be near the living room so when the furnace runs it gets quite loud. I was thinking that using solid doors instead of slotted should help with the noise....
Replacing bedroom and closet doors.
[ 11 Answers ]
I have very plain hollow bedroom and closet doors which I'd like to replace one by one. I'm looking at the more modern doors that have a colonial design pattern on both sides but are also hollow. Do I have to replace the door jams/frame too, or can I just take off the old and install the new ones...
Sliding closet doors
[ 2 Answers ]
Need to know how to put sliding closet door back onto track, is there a trick to it. I have tried everything:confused: View more questions Search
|