Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I am replacing the outside unit it is carrier 410a,can I replace the outside unit onl
[ 0 Answers ]
I am replacing my carrier 410 carrier outside unit only can I replace with a r22 unit
Install New 410a
[ 1 Answers ]
My 1987 Coleman Heat Pump T.H.E.II heat pump air handler and thermostat are in good condition. I want to install a new outside 410 A system outside. I would also install new lines and a new coil in my inside unit. I would like recommendations at to the feasibility of doing this and which...
Freon 410a
[ 3 Answers ]
I have installed a 4 ton Goodman 16seer unit using 410a. I tried to follow the book on this installation. Run gas through the pipes while brazing. New copper, 1 1/8 on return. Pulled a vacum to 40 micro, my hoses kept leaking so I used all copper pipe from guages to vacuam pump, 410 tank, to...
410a spills
[ 1 Answers ]
Does puron {410a} tend to leak and cause roof damage on hvac roof top units
About the new 410A freon
[ 2 Answers ]
Is There A Conversion Kit For My Old Gauges For Checking R22 To The New 410a? View more questions Search
|