Ask Experts Questions for FREE Help !
Ask
    chssolutions's Avatar
    chssolutions Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2013, 09:57 PM
    Tub to shower conversion
    Converted a tub into a steam shower stall. 1 1/2 drain line being used. Water gathers for a short period then drains fine. This cycle is constant during showering. I feel it's a vent issue. Can I install a studer vent to help this?

Check out some similar questions!

Tub to tub/shower conversion: Need to re-route water lines for a shower faucet? [ 12 Answers ]

Hello everyone, My wife and I just moved into an old (1930s) Spanish house in Los Angeles. We have 2 bathrooms, with the master bathroom containing a bathtub and a separate shower stall. The shower stall is tight with a low ceiling and the bathroom has no exhaust fan (only 2 windows) and...

Shower/Tub rough in conversion [ 6 Answers ]

Can I use a shower/tub rough in for a shower only. I would think I could just put a plug on the bottom of the valve where it goes down to the tub spout.

Shower to tub conversion [ 2 Answers ]

Is there a small tub available to install in a shower stall

Tub to Shower Conversion [ 4 Answers ]

We need to remove a standard 32x60" tub and replace with a shower. Is it possible to use the existing tub drain and simply slope the shower floor or is it essential to have the shower drain in the center? Thanks

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.