Ask Experts Questions for FREE Help !
Ask
    odettekleidon's Avatar
    odettekleidon Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 31, 2012, 04:01 PM
    150 amp vs 200 amp
    I am selling a 2774 sq ft home. Built in 1964. The new buyer wants to upgrade breaker box from 100amp to 200amp. My electrician said 150amp is fine. Your opinion.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jan 31, 2012, 04:15 PM
    Are you saying the buyer want you to do the upgrade prior to the sale? That would be ridiculous in my book. Sorry but not knowing what you have now or what the buyer hopes to add there is no telling what amps you need.
    shader's Avatar
    shader Posts: 235, Reputation: 12
    Full Member
     
    #3

    Jan 31, 2012, 04:37 PM
    Your electrician needs to do a load calculation to determine breaker box size. The buyer may be adding a hot tub, a home theater, work shop with large power tools, etc. Without a load calc, just saying 150 amps is fine is not correct.
    shader's Avatar
    shader Posts: 235, Reputation: 12
    Full Member
     
    #4

    Jan 31, 2012, 04:42 PM
    Ball... 1 I agree, upgrading before the sale is strange, but I've seen it done. Of course, the upgrade would be included in the purchase price, and only if purchase contract has been signed stating such. On the other hand, if the upgrade is a condition for the sale, the seller would give the buyer a credit for the cost of the upgrade, but the seller runs the risk of giving the credit and the work never gets done.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #5

    Jan 31, 2012, 04:54 PM
    IMO asking to have a service upgraded to make a sale go through is akin to extortion. This is a very typical tactic that buyers use via their home inspector minions. The HI says that a 100A service is not "up to today's standards" so the buyers use that as leverage to get a free upgrade out of it.

    Also, a load calc is completely unnecessary. If you get strong armed into this just to the 200A. There is only a negligible difference in material cost and no difference in labor. 150A services are a completely pointless thing in today's world.
    Also, also, WHO CARES what the new owner might do. They are getting a free service upgrade, let them worry about if they don't have enough power later on.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I install a 150 amp sub panel to a 200 amp panel with the sub running (3) 50 amp [ 13 Answers ]

I have square D QO panel. I am adding a Stiebel 29 on demand water heater and it calls for (3) 50 amp 240V breakers. Can I add a subpanel that has (3) 50 amp breakers to tie into my existing 200 amp service? If so what gauge copper wire would connect the two and does Square D QO make a 150 amp...

How to connect 150 amp circuit breaker to a 200 amp panelboard? [ 1 Answers ]

This is a deli stoe that has 2 old Cutler Hammer Panels ( Plug-In breakers not bolt-in Type CH ). Each panel has 200 Amp main breaker . The owner install 10 ton AC & Heat Pump roof unit that needs 150 Amp breaker to feed it . What is the best soluation without changing the panel ? Should I install...

Can I put a 150 amp breaker in a 200 amp panel to feed a 150 amp sub panel? [ 8 Answers ]

Can I put a 150 amp breaker in a 200 amp panel to feed a 150 amp sub panel with a 200 amp service?

Going from 150 amp to 200 amp electrical service? [ 1 Answers ]

Hi out there, My names Bill and I'd like to know what exactly is involved in changing from a 150 amp To a 200 amp electrical service? At the moment I have a 150 amp service and would like to upgrade. Does the meter socket box and feed wiring have to be changed? ...


View more questions Search