 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Is this a 3 pice rough in the pipe on the right is 3 in the middle is 2 in id I think itvents threw the roof the one on the left is 2in id. The pipe on the right is for a toilet of course But how do I get a sink and tub into the left pipe http://clubdisney.net/imageup/images/9688DSC01388.JPG
I'm no electrician so bare with me... it a round thermostat that says honeywell in middle.. took the ring surrounding it off... can see the dial and screws that mount it but there is this adjustment slider thingy at the bottom.. what is it and where should I have it placed... also the person who...
I am in the process of installing a bathroom in my new garage addition, and am seeking input for the 36" Sterling shower enclosure. 1) Instruction state that back and side walls can be attached to bare studs or over water resistant wall board. Any opinions on which is best? 2) The base I plan to...
"Do they make a drain receptor with female threads on the inside that could be glued to the 2" pipe afer the base is set, and with the drain grate screwing into that?" They do but I'm not too sure you can use it on a manufactured shower base. It's called a "flange type shower drain", (see image)...
I have a one piece shower that is leaking. I have taken the quarter round off around the front of the shower unit and the adjacent base boards and water is slowly seeping out from under the shower. The quarter round trim was very wet. Is there anyway to get the remaining water out from under the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
