Ask Experts Questions for FREE Help !
Ask
    stbear007's Avatar
    stbear007 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2010, 12:34 PM
    How to install honeywell he360a to a noma thermostat properly
    I have just purchased a Honeywell he360a humidifier and want to hook up to the noma 52-2546-6 thermostat (it has humidity setting) direct if possible please. I gather from the information on the instructions of both that I hook up the humidifiers (in basement) two wires (2 red or 2yellow... not sure yet) right to the noma thermostat (h1 and H2) that is located in the upstairs hallway? That is all that has to be done? Therefore I can control the humidity from the house thermostat directly and not have to hook the one up next to the humidifier in the basement as well as no transformer needed? Thanks for the help and information.
    stbear007's Avatar
    stbear007 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Jan 24, 2010, 02:23 PM

    BTW I also have a PHILCO RC 92 furnace... trying to figure out where to cut and put the humidifier at as well since a/c coil seems to be very large...
    stbear007's Avatar
    stbear007 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 24, 2010, 08:29 PM

    Thanks again for any help on this matter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Install of a Honeywell RTH221 Thermostat [ 3 Answers ]

I replaced a White Rodgers thermostat with a Honeywell RTH221. When I removed the wires there was only a white, green, red and brown. I am assuming the brown is suppose to be the yellow wire. I hook up the wires and all that I am getting when I turn on the air conditioning is hot air and the...

How to install Noma digital thermostat [ 6 Answers ]

I bought a home with a new Carrier hi efficiency gas furnace but the old original White Rodgers theromstat. The original thermostat is the mercury switch type for both heat and cool and has 4 wires (Red, White, Green and Black). I tried to install a new Noma #52-2570-6 digital thermostat, which...

How to install a Honeywell Thermostat [ 1 Answers ]

Hello, I purchased a home with a programmable Honeywell Thermostat Model RTH 7500D, however, the previous tenent took everything off the walls one of which is the thermostat. I can put it back but the wires are exposed and have no idea on what letter on the connector to install etc. I have four...

Install Noma Programmable Thermostat [ 2 Answers ]

I am installing a programmable Noma 52-2570-6 thermostat (upgrading from a previous FHP Manufacturing Thermostat that wasn't to our liking. When taking the old thermostat off, G -green O - orange Y with jumper to W - yellow C- black R - red My new thermostat requires:

Honeywell Thermostat Install [ 3 Answers ]

After an answer on this site I purchased a new thermostat today capable of central heat/cool and also for a heat pump. It is the Honeywell RTH6400. I currently have a White Rodgers (9510E7) rectangular thermostat. I am still having problems figuring which wires go where. Currently there are 8...

View more questions Search