Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I need to replace my deck belt on my troybilt 17hr. 42' deck belt diagram
[ 4 Answers ]
I need to replace my deck belt on troybilt 17hr. 42' riding lawnmover. Be nice to have a diagram
Deck tables, tributary load, and beam size for deck
[ 4 Answers ]
I am confused with "deck tables" from different sources, specifically concerning beam size for a deck. I am planning a basic deck as shown: 9677 Sources that describe the "tributary load" and "tributary length" would allow me to use as little as (1) 2x6 for the "front beam" (tributary...
Beam, post size and connection for semi-covered deck
[ 10 Answers ]
I am building a deck with a pergola cover, and would like some advice on size of post, and connection of beam to post. The attached picture shows the basic layout. I plan to put a support beam underneath through the middle (easy), so the effective joist span is only 6'. The front header/beam is...
How to keep second floor deck from dripping water onto first floor deck
[ 5 Answers ]
We are planning to build a second floor deck over an existing deck. Will be 16 x 12 when finished. My question is this. We don't want the upper deck to allow water to drip onto the lower deck when raining. How can this be prevented? I want to use 5/4 decking on top, but don't see how we can do that...
Covered patio on/near pool deck
[ 1 Answers ]
I have been wanting to do a covered area of around part of my pool for sometime now. My backyard is quite small - the pool deck starts at the house and ends at the back fence. This will require me to put my posts on my pool deck. It is a cool deck (I think that's the right kind), it looks kind of... View more questions Search
|