 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lawn Tractor will not start
I have a Troy Bilt Pony Lawn Mower that I have had about a year. It won't start. It will not turn over or make a sound. The battery is charged. The seat switch appears to be working properly. The mower is not engaged. It is not in reverse. I checked the fuse and it is OK. What else could it be?
|
||||
|
||||
|
Sounds like the connection to the starter is bad (corroded/loose) - or - one of the safety switches has not been tripped properly. e.g. My machine had a poorly aligned safety switch for the PTO lever... so it didn't get tripped and machine thought mower blades were engaged (non-start scenario) machine would not start because of this and all I had to do was re-align that switch so it would trip when PTO lever was in "up" position... and all was good again.
Hope this works for you. Jumbo1114 |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello, I currently having difficulty starting my Sears Craftsman Lawn Tractor, (Model# 917.259830). I was using the tractor and had to shut it off to move a lawn hose. When I tried to start it again it just clicked. Specifically upon turning the keying, it makes a click sound followed by a whin....
I was using my MTD riding lawn tractor. All was well, stopped for a break. Tried to re-fire the tractor and nothing, won't turn over. The battery is charged. No disconnected wires. Could it be the "Seat engine cutoff mechanism? If so how do I bypass it. Any help would be greatly appreciated.
When I try to start my lawn tractor it won't turn over. It makes a noise from the engine that sounds like when you try to start a car and it's already running. I have recently changed the spark plugs, battery, air filter, etc. It ran fine after that and just stopped and wouldn't start again.
I have a 1992 sears 14.5 hp B&S motor lawn tractor that will not start by key but will by jumping the solenoid. I have replaced the solenoid and ignition switch. After the new solenoid was installed the tractor will at least turn off but still will not start. This tractor has a brake switch that is...
While using the tractor it just slowly stopped. It turns over but does not start. Yes it has gas and oil and the air filter is clean. What do I check next?:confused:
View more questions Search
|
