Ask Experts Questions for FREE Help !
Ask
    artwales's Avatar
    artwales Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Feb 17, 2009, 04:53 AM
    Opening ports in a sagem f@st2504 wireless router
    Help
    Can some kind person tell me in detail how to open ports 2350 & 3450 tcp & udp
    I know how to get into the router i.e. p/w etc.
    I say in detail as I am not sure what I am doing and don't wish to mess things up
    The reason for opening these ports is to allow me to host races in virtual skipper 5
    A fantastic yahting simulter
    Thanks

    Art :rolleyes:
    rwinterton's Avatar
    rwinterton Posts: 289, Reputation: 15
    Full Member
    		  
    #2

    Feb 17, 2009, 09:30 AM

    Obviously what you need is a user manual. However, there doesn't appear to be one on the Sagem site. Similarly, I couldn't find one by googling.

    Here's a manual for a F@st1500 router. I'd look in there. I'll bet that the menus are similar. Look especially under the Firewall and Advanced tabs. Also, I note that this has a DMZ. You might want to use that, though it does open up everything.

    http://support.sagem-communication.c...ast1500-en.pdf
    NoDaddy dot com's Avatar
    NoDaddy dot com Posts: 101, Reputation: 0
    Junior Member
    		  
    #3

    Mar 4, 2009, 03:16 AM

    Adapt to suit
    Port Forwarding for the Sagem Fast2504

    Or
    PortForward.com - Free Help Setting up Your Router or Firewall
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connect to wireless printer and wireless router at the same time [ 3 Answers ]

Hello I can connect wirelessly to my router and I can connect wirelessly to my pinter one at a time. If I'm browsing the internet and want to print I have to break my connection to the router and connect to the printer. This is a pain in the .(especially when listening to pandora radio) ...

Changing wireless router Linksys WRT54GS to a wired router [ 8 Answers ]

How can I disable my wireless router to a wired router. The model is a Linksys WRT54GS.My two computers are now in one room and do not need to be wireless.I will be using a 50ft. Cable. Does it make any difference if the color of the cable is blue or yellow ?

Wireless Printer and wireless router [ 3 Answers ]

I have a wireless printer, with a wireless router. I set up the printer through my router and the printer connects. But when I go to print it will not. I did a test page from the printer and everything passes. I do not understand. This does the same thing on 2 computers. Randy

Map Ports For WinMx and a Wireless Router [ 4 Answers ]

Does anyone know how I can map ports needed for WinMx to work on my Win XP machine that is connected to a D-Link wireless router and then a cable modem? All other apps work OK (IE6-etc) but when setting up WinMX (music sharing program) the setup tells me that it cannot set up TCP ports like 6699...

Opening Ports on a router [ 5 Answers ]

Have just upgraded to ADSL and tried to access a couple of game sites but when I try to enter a game am refused admission (did all the normal things register etc). Have been told by the SITE that I need to OPEN THE PORTS on my router. I have no idea what they are talking about and was advised to go...

View more questions Search