 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Briggs & Stratton lawnmower cables fitting.
Briggs & StrattonQuantum XTE 5HP
The top push handle has broken at the bracket where it joins the lower tube. I have been given a top tube from another B&S mower. The bracket/ to lower tube fitment is identical, some other holes for cable attachment look different. When I got the mower, the cables at bar end were all disconnected. Cables at engine end are still connected. Question 1. Has anyone had experience with swopping top bars of similar B&S mowers? Question 2. Does anyone know of plans showing routing and where cable brackets fit ? |
||||
Check out some similar questions!
Hi we need help with trying to set the vavles in our riding lawnmower. We have a 15.5 briggs and stratton thank you
Just bought a new lawnmower, and it starts fine, but it sounds as if its at an idol speed. It didn't come with a idol adjustment cable, so I'm just wondering if it's the way its supposed to be? It sounds like it's barely running, and it only cuts grass at a very slow walk. Any help would be...
I have an older 16.5 hp Briggs and Statton riding mower,and have had the starter rebuilt. I was told that before I put it back on the mower I need to have "The Valve" turned or it would be pointless.My question is what valve needs to be turned and where is it located.I am assuming I would takr the...
The other day this engine just quit and I had no spark from the coil. It has the electronic ignition so I cleaned everything under the flywheel and put it back thinking that this must be the problem but no. There is a small wire that goes to the coil and when I pull it off it will fire. I found two...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
