 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Disconnect alarm system.
Have a 1992 Acura Legend LS model. I put in a remote door opener/lock/starter system because it was cheaper than replacing the door sensor as the alarm would go off every time I used the key to open the door. The remote lock function doesn't work now and if the unlock function stops working as well then I'm back to using the key. I don't want to spend more money fixing it, so, I was told to disconnect the horn wire and this would disable the alarm system, which it did for a day. It now seems to have reset itself and I'm back to the alarm going off when I use the key again.
How do I disable the alarm system so I can use the key to open the doors without the alarm going off due to the bad door sensor? Thanks. |
||||
Check out some similar questions!
Toyota Alarm System
[ 4 Answers ]
Does a 2000 Toyota Rav4 have a keyless entry or do they have an alarm with keyless entry?
Which is the best home alarm system
[ 4 Answers ]
We are having a new home built and we would like to install an alarm system. We are so remote it would take a officer 20-40 minutes to respond so we were thinking of using cameras so we can at least see who and maybe get a license plate number. Any suggestions or comments on which systems are...
Transferring Brinks Alarm System to Non-Monitored System
[ 5 Answers ]
I understand that when you cancel your Brinks-monitored security system that they come and remove their equipment (which you apparently don't own) or you can buy all their equipment for $500. The equipment removal exposes unpainted walls and previously-covered holes. Is it possible to install a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
