Hange blower speed in kenmore furnace

andrzej5 Posts: 1, Reputation: 1

New Member

Nov 1, 2008, 11:38 AM

Hange blower speed in kenmore furnace

Hange blower speed in kenmore furnace

wmproop Posts: 3,749, Reputation: 91

Ultra Member

Nov 1, 2008, 04:31 PM

Originally Posted by andrzej5

hange blower speed in kenmore furnace

Don`t understand the word hange,, what is the question?

Add your answer here.

Check out some similar questions!

Replacing a 3 wire GE furnace blower motor with a newer Dayton 4M098G multi speed mo [ 1 Answers ]

My GE furnace blower was a very simple, 5 wire installation, which the bearings wore out on. I am now truing to convert the wiring to adapt to my older furnace, and the new motor has more wires, and different color wires, and the schematic on the motor is too simple, it does not address the...

Furnace blower speed [ 1 Answers ]

Ihave a Goodman furnace with a variable blower speeds. I need to make the blower run faster for the A/C and slower for heat. How do I change the blower speeds?

Can blower motor speed be adjusted on a Day and Night furnace ? [ 1 Answers ]

I have a Day and Night up flow furnace, about 13 years old. Can the blower motor speed be adjusted to a slower speed ? There is only 8 feet of duct and the noise coming out of the registers is very loud. Model # 395CAV036055 66,000 BTU Blower # 511, 1/3 hp If no one has any info, does...

Air conditioner, blower fan speed with carrier furnace [ 2 Answers ]

The fan speed does not adjust when the air conditioner is on . Is this normal ? If I turn the set temp up high enough the air conditioner turns off and the adjustability returns. Auto, low, medium and high all work. When I set the temperature back down so the air conditioner turns back on the...

Speed Selector Switch for Reclaimed Furnace Blower [ 6 Answers ]

I have an Emerson furnace blower (5 speed, 10 amp, 115V, 3/4 hp). I am looking for a switch to at least operate 3 speeds and how to connect it. The wire colors are white, black, yellow, blue, red, and brown. In addition I would love to put a timer in-line. The model number is K55HCNNZ-7057 for...