 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Adding a line to an electric weed eater
Hello
I am having difficulty understand how to add line to a weed eater. It is an electric, 065 single line weed eater. The spool has an arrow (a hint as to which direction to wind, correct?) and it has little slots on one side (to the hold the line?). How much line do I place in the slot and is that the line that I place through the small hole where the spool goes on the weed eater? Also, I bought a 50' replacement line. Do I have to cut it and place, say 10' or 25' in the spool or place all 50' on the spool? Thank you very much. |
||||
Check out some similar questions!
The fuel lines connect the tank(2) primer(2) and carburetor(2) What goes where?
Looking at the bottom of a single line weed eater, do you load the line clockwise or counterclock wise so it will lengthen when you tap the ground?
I have a Weed Eater. How do I replace the trimmer line? <moved>
I have an older Weed Eater XT 40T and the line breaks constantly. I have tried using WD 40 to lubricate the inside and scraping the edges clean of dirt. I wind the line as carefully as I can to keep it tight and even. I think the button in the center is getting stuck so maybe the spring inside is...
I have a weed eater that has 2 broken fuel lines. I would like to know where I can go to replace them? The name of the gas weed eater is,FEATHER LINE. Thanks!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
