|
|
|
|
New Member
|
|
Feb 16, 2011, 03:02 PM
|
|
Craftsman Garage Door Opener light not working after new door installed
I have a Craftsman Model 139.18054 Garage Door Opener and the light has been working since it was (professionally) installed 7 or so years ago and up to last Monday when I had a new garage door installed. The installer said they did not do any thing to the unit except attach new safety sensors and wires... Now the light does not go on when the door opens or closes up, nor when the sensor is tripped as it once did. The new sensors are working properly (but I notice I no longer get a "clicking" noise when walking past the sensors - they were replaced with a non stock sensor)... The only thing the installer says is that because this is an older unit this can happen... Is there an internal light switch or something that was inadvertently deactivated to cause the light not to work any more? Oh and for the record, I have changed the bulb with one that I made sure was working... Still nothing...
Thanks for your help in advance.
Peter
|
|
|
Printers & Electronics Expert
|
|
Feb 16, 2011, 08:22 PM
|
|
Peter.
Can you get a schematic for the garage door opener and attach it to this post, please?
|
|
|
New Member
|
|
Feb 16, 2011, 08:40 PM
|
|
Hi Don,
Thanks for your response...
Here's a PDF of the manual, that's the best I can do. I can't find a wiring schematic...
http://tv.manualsonline.com/mdownloads/16bf3660-edc5-470d-967c-1f2f5a1f5411.pdf
I think the solution is with original sensors as that is the only thing the installer changed... I will go to my neighborhood Sears store and see if they have them in stock (if they don't work H can always return them), if not I'll try somewhere else. If you can offer any other potential solutions, let me know...
Thanks,
Peter
|
|
|
Printers & Electronics Expert
|
|
Feb 16, 2011, 08:49 PM
|
|
My immediate suspicion is that there is a contact tab that has been broken off.
When the chain moves in either direction this contact should make and power up the light.
The contact can be any one of a dozen things. Metal contact straps, a solenoid, a relay so forth and so on.
|
|
|
Printers & Electronics Expert
|
|
Feb 16, 2011, 08:56 PM
|
|
Hey, one more silly question, have you changed the bulb?
The PDF file is about installation, there is no schematic. Check with Sears, they may have it online.
|
|
|
New Member
|
|
Feb 16, 2011, 09:10 PM
|
|
Yeah changing the bulb was the 1st thing I did... I even made sure the replacement bulb worked ;-)
Hmmm, OK I'll see if I can get a schematic from Sears...
P
|
|
|
New Member
|
|
Feb 16, 2011, 09:47 PM
|
|
Comment on donf's post
Don, I don't think that is the case as the light "used" to go on when the door was up and someone walked across the safety beam so no movement. The other thing... When this happened (crossing the beam) there was an audible "click"... As I mentioned, the only thing the installer changed was the sensors to a non craftsman sensor.
|
|
|
Home Improvement & Construction Expert
|
|
Feb 16, 2011, 10:10 PM
|
|
Do you have the owners manual. The light can be set to come on or not when the door beam is broken. When this function is turned off the light will not come on when the door is opened. If you can't find owners manual let me know, I'll look for mine.
Are you certain about model number? Does not come up on search of Sears.com
|
|
|
New Member
|
|
Feb 17, 2011, 09:29 AM
|
|
Comment on hkstroud's post
No where in the manual, that I can find does it say how to do this...
http://tv.manualsonline.com/mdownloads/16bf3660-edc5-470d-967c-1f2f5a1f5411.pdf
Peter
|
|
|
New Member
|
|
Feb 18, 2011, 12:42 PM
|
|
Figured it out! Can't use compact fluorescent, must use standard bulb! Duh!
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Craftsman garage door opener keeps opening when trying to close...
[ 3 Answers ]
It's as if there's something between the two eye beam fixtures at the bottom of the door. Opens fine. But try to close and it reverses direction immediately. The only way to close it is by holding the button until the door is all the way down. The unit is from May '94, is 1/2 hp, model#(?) is...
Overhead Door garage door opener light just blinks?
[ 5 Answers ]
:confused: My 15 y/o Overhead Door (brand) garage door opener was working fine opening & closing until a few days ago. It has very low usage because I mostly park my car outside the garage door. Now when I press the remote control w/ new battery OR the hard wired wall switch, the light on the...
Craftsman Garage door opener
[ 1 Answers ]
How do I reset the keyless entry password on my garage door opener? It's a craftsman 1/2h.r. Everyone keeps telling me to press the reset button on the unit, but there is no reset button on the unit nor the keypad??
View more questions
Search
|