Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Arch Fault Breakers
[ 3 Answers ]
I installed AFCI breakers in a 100 amp panel. When the lights are turn on the breaker shut down the circuit. Everything is wired properly! Is there a special way to install AFCI breakers? Help Parcom
Recepticals and breakers
[ 1 Answers ]
How many receptical can be put on a 20 amp breaker? Also would it be okay to put lampost lights on a breaker that services my basement? The total wattage would be 1055 watt. Thank you, Don
ARC fault breakers ?
[ 4 Answers ]
I see where the 2005 NEC requires ARC fault breakers on all bedroom circuits,lighting and wall recepticals. It appears that this is for new construction. Would this also apply to rewiring an old house? Thanks in advance. Tom
Fuses v breakers
[ 3 Answers ]
thought I'd look on the web for this and I found this site. Here goes... my building was built in 1939 and has old cloth wire in it. My neighbors have all had their fuse boxes upgraded to circuit breakers, and since I recently fried a wire inside a conduit while hanging a fixture, I thought...
Circuit breakers
[ 2 Answers ]
I would like to up grade the amps going to my garage so I can run my saws and power tools with out dimming my shop lights. I currently have a old style fuse box in the garge feed with 12ga uf cable run off a 20amp circuit breaker in the service panel. My plans are to replace the fuse box with a new... View more questions Search
|