Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rough idle after replacing crank sensor
[ 2 Answers ]
I have a 1995 dodge stratus es 2.5L. About 6 weeks ago I replaced my crank sensor, before doing so I had the distributor cap off and plug wires off testing for a no start. Since getting it running again (crank sensor) it has a bad hesitation, the warmer it gets the worse it runs. I have three codes...
Seat kill switch on poulan lawn tractor
[ 4 Answers ]
Hey folks. My Poulan lawn tractor started to die every time I let the clutch out. An "expert" on another discussion board suggested that the problem was likely the seat emergency plug and it simply wasn't sensing that I was in the seat. To test the theory, he said I should clip the plug and bypass...
Craftsman mower kill switch
[ 1 Answers ]
I got off the lawnmower while it was running to move a toy and the mower stopped, but now I can't get it started again. Am I missing something? I tried shifting to neutral, disengaging the blades and pushing in the clutch before I tried to start it again, but it's like I'm getting no juice from...
Kill/stop wire on craftsman
[ 5 Answers ]
Craftsman 5.5 hp lawnmower - Model # 917-387070 (? ) How do I replace this cable? It looks like there may be a spring missing (if there was one) down near the engine. I know something is wrong with the cable because it did finally start, then would not cut off. Any help is appreciated. I have... View more questions Search
|