|
|
|
|
New Member
|
|
Sep 13, 2007, 06:00 PM
|
|
Washing machine
Washing machine fills with water then working
|
|
|
New Member
|
|
Sep 13, 2007, 06:01 PM
|
|
Originally Posted by tony incerto
washing machine fills with water then working
Washing machine fills with water then stops working
|
|
|
Ultra Member
|
|
Sep 13, 2007, 07:35 PM
|
|
Need mor info. Do you hear any noises? Can you hear the timer motor running?
|
|
|
New Member
|
|
Sep 13, 2007, 08:04 PM
|
|
No noise,can't hear moter running, fills with water then try to turn dial nothing works on any cycles.
|
|
|
Ultra Member
|
|
Sep 14, 2007, 01:42 AM
|
|
Check the contacts in the timer. Make sure they are opening and closing as you advance timer. Have you checked with volt meter to see where you are losing the power at in the unit?
|
|
|
New Member
|
|
Sep 14, 2007, 02:27 PM
|
|
How do I check contacts in timer and how to see timer if contact are opening and closing
|
|
|
Ultra Member
|
|
Sep 14, 2007, 02:40 PM
|
|
Disconnect the power to the unit. Remove the console and look, you will see several sets of contacts. Do the look butnt or are the welded together? Turn the timer dial and watch and see it they open and close. Also if you own and know how to use a volt meter, check voltage and see where you lose it at.
|
|
|
New Member
|
|
Sep 14, 2007, 04:03 PM
|
|
Unplug machine,enscrewedconsole silver box behind dial. Turned dial and pulled knob little silver button goes in and out don't know if that's the shaft. Little black plastic tab flush on silver box slides up and down.is that what you mean open and close.
|
|
|
New Member
|
|
Sep 14, 2007, 04:30 PM
|
|
Are contacts on back of panel I took off, or on machine itself,maytag model # lat9635aae will that help you.
|
|
|
Ultra Member
|
|
Sep 14, 2007, 04:39 PM
|
|
The contacts are in the back side of the timer. You should see them open and close as the timer is advanced.
|
|
|
New Member
|
|
Sep 14, 2007, 04:49 PM
|
|
Turn dial to regular washer,rinse,spin,etc. I see nothing moving.what exactly are conacts.
|
|
|
Ultra Member
|
|
Sep 14, 2007, 04:51 PM
|
|
They look like the set of points in older cars but there are several sets of them
|
|
|
New Member
|
|
Sep 14, 2007, 05:06 PM
|
|
I see nothing opening or closing maytag model # lat9635aae what else please help. Machine still unpluged while trying.
|
|
|
Ultra Member
|
|
Sep 14, 2007, 05:09 PM
|
|
Do you have a volt meter and know how to use it?
|
|
|
New Member
|
|
Sep 14, 2007, 05:15 PM
|
|
No it just broke last month what else.
|
|
|
Ultra Member
|
|
Sep 14, 2007, 05:20 PM
|
|
Need to see if you are getting power to the timer and the washing macine motor
|
|
|
New Member
|
|
Sep 14, 2007, 05:24 PM
|
|
How to see if I'm getting power without a voltage meter.
|
|
|
Ultra Member
|
|
Sep 14, 2007, 05:34 PM
|
|
No way safely to check without meter
|
|
|
New Member
|
|
Sep 14, 2007, 05:37 PM
|
|
Thanks anyway I'll be talking to you later.by the way I'm a bears fan.
|
|
|
Ultra Member
|
|
Sep 14, 2007, 05:39 PM
|
|
Bears fan. Well then, I'm sorry about the superbowl, but you all have won enough anyhow. It was our turn. LOL
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Washing Machine Drain- How high can machine lift H2O
[ 1 Answers ]
Hi... Thinking about moving the washer down in the basement but the main sewer drain leaving the house is about 2' off the floor. There is currently a sewer lift installed for downstairs toilet that complicated cutting into the existing drain for new Y. Without getting to detailed, there is an...
View more questions
Search
|