Ask Experts Questions for FREE Help !
Ask
    jeffbowan's Avatar
    jeffbowan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2008, 12:17 PM
    Replacing a Snapper blade drive belt
    I have a 28" Snapper riding mower, and I am attempting to replace the blade drive belt. It appeared straightforward at first, but how do I get the belt around the drive wheel? Do I have to remove the drive wheel entirely? Or is there another way?

    Thanks.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 20, 2008, 03:24 PM
    There is another way, LOCK the clutch / brake pedal down, put the transaxle in "R" and depress the clutch. Then put the trans. Into high gear and engage the clutch then remove from that side.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing The Belt on a Snapper Riding Mower [ 4 Answers ]

I need to know how I replace the belt on my Snapper SR1333 riding mower. I just purchased a belt and now I need to know how to change it. I thought it was a quick fix but I guess that's what I get for thinking. :)

Lawn tractor blade drive belt twisting/breaking [ 3 Answers ]

I recently replaced the blade drive belt on my riding mower and it broke after 3 hours. I checked for anything that would cut the belt, found nothing, and installed another new belt. After engaging the blades for 20 seconds I stopped and checked the belt and noticed it had twisted. This happened on...

Replacing the drive belt on a craftsman riding mower [ 4 Answers ]

How can you replace the power drive belt on a craftsman riding mower

Need belt diagram for craftman blade drive pulleys? [ 1 Answers ]

My father has an older Craftman riding lawn mower 18 hp twin don't know the model number cause I can't find the owners manual and the mower has been repainted. Blade setup is 42". If anyone can help me it will be greatly appreciated. And if possible could someone tell me where to even begin to...

Murray 14 hp 42" cut Blade Drive Belt Loose [ 3 Answers ]

What are ways of tightening the blade drive belt on a Murray Model 42813A Riding lawn mower with a 42" wide cut? Just installed new one & blades will turn while mower is stationary, but will stop while trying to run over any grass?

View more questions Search