Ask Experts Questions for FREE Help !
Ask
    silentpassion04's Avatar
    silentpassion04 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 19, 2008, 12:41 PM
    Murray riding lawn mower solenoid wire
    I have a murray riding lawn mower and the starter solenoid went out on it, so my husband bought a new one took it off and when we went to put it back together he couldn't remember what wire went where. Does anyone please please please have any idea how to put it back together?:confused: :mad: :mad:
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 19, 2008, 07:12 PM
    Do you have 3 wires? Or more?
    silentpassion04's Avatar
    silentpassion04 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 19, 2008, 07:37 PM
    Yes there is more then 3 wires, there is two big red wires, one big black one, small red, small yellow, small orange, small black, there are more wires but they do not attach to the solenoid... I think that is it. The little wires are coming off the ignition. The solenoid has two prongs on the top and then the ground prong on the base of it, I just need to know what wires go where. Thank you so much for responding, I hope the info I provided is enough
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray riding lawn mower electrical problem [ 7 Answers ]

My mower runs but only as long as the battery has a charge. And then it dies, so what could be the problem? Please help I have a huge lawn and a push mower just doesn't get it!!

Murray Riding Lawn Mower will not start [ 9 Answers ]

I have a Murray Riding Mower that has a problem in the electrical starter control system. The starter does not turn. I have replaced the solenoid and the problem remains. I have used jumpers to bypass all the safety switched one at a time and also bypassed all of them with no change in the...

Model number for a murray riding lawn mower [ 5 Answers ]

I'm looking for a model number on my murray 14.5 hp 42" mower. I have looked under the seat, but there is no model number. I found a number by the steering wheel and it is 44x6817, but this is not the model number. All I need to a part number for a new mower belt and new blades. Please help if...

Solenoid trouble for murray riding lawn mower [ 1 Answers ]

I have a murray riding lawn mower and for some reason the solenoid keeps going bad. I maybe get one or two mowing jobs done before I have to replace it. Does anyone know what could be causing this? Thanks Kim

Wires on murray riding lawn mower. [ 3 Answers ]

My dog pulled wires loose on our mower. I don't have the instruction booklet to put them back correctly. Please help!

View more questions Search