Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Rheem RACB-030JAS residential A/C unit condenser fan motor replaced
 [ 26 Answers ]
 I just replaced the condenser fan motor and it initially spun up then stopped, after 10 minutes it ran again then stopped. Now I can hear it buzz then stop but not spin. The original motor was a GE 5KCP39BG K075CS 1/6 HP 1075 RPM 208/230 V its replacement a Dayton 4M205G 1/4 hp 1075 RPM ... 
Honeywell thermostat heat/cool in Rheem 2 stage furnace?
 [ 1 Answers ]
 I have a Honeywell 1 Heat/1Cool thermostat (TH6110D1013) that I would like to use with a Rheem 2 stage gas heat furnace. I think it is possible but would I get the same benefits as having a thermostat with 2 heat/1 cool? Would I just connect the W terminal on the Thermostat to the W2 on the... 
Wiring of a Rheem Condenser fan motor
 [ 1 Answers ]
 The motor looks to have 2 orange wires, 1 black wire, and 1 brown wire. Where do they go back to. Do the 2 orange wires go to the capacitor? Black go to contact + and brown to common? The 2 orange wires have continuity between them with no or little resistance. Are these both ground wires or... 
Rheem roof top heater
 [ 4 Answers ]
 
Hello, I have a Rheem combination heating and cooling rooftop unit equipped with intermittent ignition and it's probably 10+ years old. The problem is that it won't light. I turn on the thermostat to call for heat. The vent motor turns on and then the ignition spark is energized, (I can see... View more questions Search 
  |