[Cgirl]

If you are hooking up T1 service at your office... what is a dataport and what is it used for?

[ScottGem]

Talk to the T1 provider. They will explain.

Some other points to add, this really belongs in the Network forum, its not really a begniners question. I also question why a T1. Generally you can get the same performance and easier management with a business DSL line for a lot lower cost.

P.S. To Need, you got to learn to be succint in your answers you types almost 3x the characters ;)

[NeedKarma]

A T1 installation is usually not user-installed. There are many differents types of csu/dsu or modems that are used. Best to call your provider.

[cajalat]

Basically there are two sides to a T1. The side that faces the provider and the side that faces your network. The side that faces your network is the data port. Usually if you only have a CSU/DSU then you'll get what looks like a telephone cable from the provider and then another V.35 cable (sometimes db25) cable (your dataport) goes into the serial connection on your router. Now-a-days you can get a router that has a CSU/DSU built-in so all you have to worry about is the connection to the provider and a connection to your local ethernet.

If you have no idea what this all means then I'm with NeedKarma. Have someone that knows what they're doing set this up for you.

Casey